Kaspo Admix AG 1015
Kaspo Admix AG 1015 is a liquid additive formulated to be mixed with polymer grout to significantly enhance bonding strength, workability, and sag resistance while maintaining appropriate setting time. Its high water-retention properties make it especially effective at improving overall grout performance in demanding environments.
Available Pack Sizes
Kaspo Admix AG 1015 – 5 litre; Kaspo Admix AG 3030 – 250ml; Kaspo Admix AG 1010 – 100ml.
Features
Enhances bonding strength of grout by up to three times when mixed correctly
Reduces thermal cracking caused by the heat of cement hydration
Resistant against salt water and chemical exposure
Performs across a range of high and low temperature weather conditions
High shear and compressive strength contribution
Prevents fading and discolouration of coloured concrete/grout
Suitable for walls, floors, interior, exterior, dry areas, and wet areas including showers and swimming pools
Low VOC formula
Directions of Use
01
Before starting, remove spacers and debris from grout joints; clean dust and dirt using a wet sponge. Do not leave standing water in joints.
02
Ensure substrate temperature is between 4°C and 32°C. Apply a grout release agent or sealer if necessary.
03
Stir or shake Kaspo Admix thoroughly before use. Mix full units only.
04
Mix 1 kg of grout with a 250ml unit of Kaspo Admix. If additional liquid is needed, add only 1–2 ounces of water — do not add more admix than specified.
05
As with epoxy materials, always mix in full units for consistent results.
Technical Specifications
Property | Value |
|---|---|
Water Absorption (ANSI A118.7-3.4) | < 7% |
Compressive Strength (ANSI A118.7-3.5) | 24 MPa |
TCA Service Rating (ASTM C-627) | Extra Heavy |
Pot Life | 60 minutes |
Time to Foot Traffic | 720 minutes (12 hours) |
Wet Density | 1860 kg/m³ |