Kaspo Bond AG 111 Grout
Kaspo Bond AG 111 is a polymer-modified grout additive designed to deliver greater abrasion resistance and minimize the risk of efflorescence in tile joints. Engineered by Kasper's product team based on ongoing market feedback, it fills gaps and self-levels to produce hard-wearing, non-dusting tile joints calibrated for high-resistance grouting from 1mm up to 5mm across horizontal and vertical surfaces.
Features
Prepacked, factory-controlled formulation using special aggregates and pigments
Effectively fills gaps and self-levels for a hard-wearing tile joint
Polymer-based, non-shrinking, non-cracking formulation
Specially designed for all types of marble and tile joints
Resists shrinking, cracking, powdering, and general wear
Stain-free with UV resistance
Anti-fungal and anti-bacterial (bacteriostatic and fungistatic)
Easy to apply and clean; available in a wide range of colours
High compressive strength and good bonding, suitable for heavy foot traffic
Directions of Use
01
Ensure the tile adhesive underneath has fully set before grouting.
02
Clean joints of all adhesive residue and contaminants using a grout raker.
03
Mix 1 part clean water into the grout powder and mix thoroughly using mechanical means until a smooth, uniform paste is obtained.
04
Pack the joints using a grout float or rubber squeegee, ensuring joints are completely filled. Remove excess grout from the tile surface.
05
After approximately 15 minutes, clean the tile using a damp sponge, working diagonally across the joint lines.
06
Finish by washing down with clean water and a sponge to remove any dried grout film.
Technical Specifications
Property | Value |
|---|---|
Pot Life (@35°C ± 2°C) | 30 minutes |
Cure (@35°C ± 2°C) | 24 hours |
Setting Time | > 40 minutes |
Final Setting Time | 480 minutes |
Open Time | 30 minutes |
Shrinkage (7 days) | < 0.10% |
Compressive Strength (7 days) | > 30 N/mm² |
Tensile Strength (7 days) | < 15 N/mm² |
Flexural Strength (standard conditions) | 35-40 N/mm² |
Time to Food-Grade Traffic | 1440 minutes (24 hrs) |
Packaging | 1 kg |
Kaspo bonf AG 111 Grout / kaspo flo epoxy bong AG 1001 colours
AG 1020 WHITE
AG 1030 ZED BLACK
AG 1040 IVORY
AG 1050 DARK BROWN
AG 1060 RED BROWN
AG 1070 ALPINE BLUE
AG 1080 CHOCOLATE
AG 1090 LIGHT GREY
AG 1310 DARK GREY
AG 1320 GREY
AG 1330 ASPECTRA PINK
AG 1560 MOCHA
AG 1580 SABLE
AG 1340 COPPER BROWN
AG 1350 ECO GREEN
AG 1360 TERRACOTA RED
AG 1370 TAN BROWN
AG 1380 CREAM
AG 1390 POSTAL RED
AG 1510 SANDSTONE
AG 1520 BURGANDY
AG 1530 LEMON YELLOW
AG 1540 RAVEN
AG 1550 ALMOND
AG 1570 SKYBLUE
AG 1590 SPECTRA BLUE
Note: Actual installed colour may vary from swatch due to site conditions, product preparation, lighting, and tile type sold as indicative reference only.