Kaspo Flo Epoxy Bond AG 1001
Kaspo Flo Epoxy Bond AG 1001 is a two-component, colour-fast epoxy grout engineered for hard-wearing, impervious tile joints in environments that demand superior chemical resistance and hygiene. It effectively fills and self-levels to create a dust-proof joint, making it the specification of choice for hospitals, swimming pools, commercial kitchens, and high-footfall public spaces.
Features
Prepacked, factory-controlled formulation for consistent quality
Anti-stain properties for maintenance-free performance
Resistant to bacteria and fungal growth — suitable for hospitals, operation theatres, clinics, swimming pools, and kitchens
High bond strength for ceramic, porcelain, vitrified tiles, large-format tiles, natural stone, and artificial stone
Chemical resistance across a wide temperature range — suitable for wet areas, swimming pools, spas, and jacuzzis
Crack-free, stain-free, waterproof, and easy to clean
Directions of Use
01
Ensure joints are completely dry and free from dust, grease, and loose particles.
02
Add Component B (hardener) into Component A (epoxy resin) and mix thoroughly with an electric mixer for 2–3 minutes at low speed (400 rpm/min), until a homogeneous, uniformly coloured mixture is achieved.
03
Apply the grout using a rubber spatula, pushing the mixture sideways and diagonally into the joints until completely filled.
04
Simultaneously remove excess material from the tile surface using a hard, damp sponge.
05
Finish by cleaning diagonally across joint lines with a soft sponge, rinsing frequently with clean water to remove any residual grout film.
Technical Specifications
Property | Value |
|---|---|
Shear Adhesion Strength (Initial, EN 12003) | < 2 N/m² |
Shear Adhesion Strength (After Immersion in Water) | < 2 N/m² |
Shear Adhesion Strength (After Thermal Shock) | < 2 N/m² |
Abrasion Resistance (EN 12808-2) | 250 mm² |
Mechanical Flexural Strength — 28 days (EN 12808-3) | 30 N/mm² |
Mechanical Compressive Strength — 28 days (EN 12808-3) | 45 N/mm² |
Shrinkage (EN 12808-4) | 1.5 mm/m |
Water Absorption After 4 Hours (EN 12808-5) | 0.1 g |
Packaging | 5kg, 3kg, 1kg |