Kaspo Silver Bond AG 201

Kaspo Silver Bond AG 201 is a white, eco-friendly, non-shrinkable polymer adhesive engineered for fixing vitrified tiles and small-format natural stone, indoors and outdoors. It is formulated to perform reliably over cementitious and self-leveling screeds, making it a strong fit for both residential and commercial installations that must withstand physical stress and mild chemical exposure.

Check Mark Arrow

IS: Type 2 Adhesive

Check Mark Arrow

EN 12004 / ISO 9001:2015: Classification C2FT

Suitable Substrates

Commercial and residential installations of ceramic tiles, vitrified tiles, and natural stone over most drywall boards and clean cement-based surfaces; suitable where installations must resist physical abuse, shock, and mild chemicals (interior & exterior). Substrates must be flat, mechanically resistant, and free of loose material, grease, oils, paint, and wax.

Features

  • High polymer-modified thin-set adhesive with strong bond strength

  • Improves water resistance of the tile installation

  • Accommodates physical and thermal movement without cracking

  • Suitable for mosaic tiles and various vitrified tiles/stones

  • No slip observed on vertical applications

  • Applicable at thicknesses up to 10mm

  • Suitable for both indoor and outdoor tile-on-tile applications

Directions of Use

01

Mix with clean water (approx. 5.5 litres per 20kg bag) until a smooth, lump-free paste is formed

02

Rest for 5–7 minutes to mature, then re-stir before use

03

Spread no more than 1 sq.m at a time using a notched trowel; apply a 3mm layer

04

Lay the tile and press firmly to squash the adhesive groove

05

Wipe off surplus paste with a damp cloth

06

Allow minimum 24 hours cure before grouting

Technical Specifications

Property

Value

Color & Appearance

Grey

Pot Life

> 60 minutes

Open Time

> 30 minutes

Setting Time

1000 minutes (~16.5 hours)

Temperature Resistance

5°C to 43°C

Slip Resistance

0 mm

Tensile Adhesion (28 Days)

1.50 N/mm²

Shear Adhesion (28 Days)

1.50 N/mm²

Bulk Density

1380 kg/m³

Coverage (20 kg bag)

30-35 sq. ft.

Water Required

~5.5 litres per 20kg bag

Frequently asked questions

What's the difference between AG 151 and AG 201?

Both are Type 2 polymer adhesives, but AG 201 offers a slightly higher temperature tolerance (up to 43°C vs 37°C) and marginally higher tensile adhesion, making it well-suited to hotter climates and natural stone applications.

Can this adhesive be used on natural stone?

What's the difference between AG 151 and AG 201?

Both are Type 2 polymer adhesives, but AG 201 offers a slightly higher temperature tolerance (up to 43°C vs 37°C) and marginally higher tensile adhesion, making it well-suited to hotter climates and natural stone applications.

Can this adhesive be used on natural stone?